Saturday, April 30, 2016

Re: [MW:24746] Effect in future of oxidation in root weld for SS304

Corrosion resistance will be affected.

On 30 Apr 2016 8:41 a.m., "LALIT VADADORIYA" <lalit.vadadoriya@gmail.com> wrote:
Dear sir,

What will be effect in Oxidation in SS 304 root weld.

please expain.

Regards

Lalit Vadadoriya
Dy.Manager(Inspection)
Engineers India Limited

Dahej Petrochemical Complex,
Dahej (Gujarat)
Mob.9725214705

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKjb_1%2B54DqiQKhH7R%2Bfws_san5BDHLasMYRMr1GcnpWZR1Ttw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2B6Tn1LAox%3DP71NpdCU7T_DKrSL_ohq6h7%2Bt%2BCw8ySkPSDhE0w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[MW:24746] Effect in future of oxidation in root weld for SS304

Oxidisation lower its corrosiin resistance capacity.And reduce service life.
Its depend on fluid service.in case of instument air effect will slow but case of DM water and corrosive fluid effect is very fast.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/07358a28-49fe-421f-8fc7-83d9689ce8ca%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Friday, April 29, 2016

[MW:24745] Effect in future of oxidation in root weld for SS304

Dear sir,

What will be effect in Oxidation in SS 304 root weld.

please expain.

Regards

Lalit Vadadoriya
Dy.Manager(Inspection)
Engineers India Limited

Dahej Petrochemical Complex,
Dahej (Gujarat)
Mob.9725214705

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKjb_1%2B54DqiQKhH7R%2Bfws_san5BDHLasMYRMr1GcnpWZR1Ttw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Wednesday, April 27, 2016

Re: [MW:24744] RE: 24723] welding filler metal for SS321

then what is necessity to select SS321

THANKS & BEST REGARDS,
KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,
CONSULTANT-WELDING & QUALITY

On Tue, Apr 26, 2016 at 9:22 AM, Himan Nikdin <himan.nikdin@outlook.com> wrote:
This an Air Cooler, and the operating temperature is +350C.


Date: Mon, 25 Apr 2016 00:04:41 -0400
Subject: Re: [MW:24739] RE: 24723] welding filler metal for SS321
From: pgoswami@quickclic.net
To: materials-welding@googlegroups.com
CC: pgoswami@quickclic.net

What's the process fluid and the design temperature? 

-------- Original message --------
From: Himan Nikdin <himan.nikdin@outlook.com>
Date: 2016-04-24 11:26 PM (GMT-05:00)
To: materials-welding@googlegroups.com
Subject: [MW:24734] RE: 24723] welding filler metal for SS321


Dear Pradip

Since the operating temperature is below 400C, I think the E308LSi can be a good choice, Are you agree?

Regards,
Himan

From: pgoswami@quickclic.net
To: materials-welding@googlegroups.com
CC: himan.nikdin@outlook.com
Subject: RE: 24723] welding filler metal for SS321
Date: Wed, 20 Apr 2016 11:05:35 -0400

Hi Himan,

 

What's proposed by ESAB is not correct. Please seethe two attachments showing highlighted texts. S.S 321 is a Titanium stabilized steel. Hence the matching weld metals also  shall be  stabilized.

 

Titanium gets oxidized fast when it's added through coating.  Hence other stabilizers such as Nb has to be added to the weld puddle to provide the stabilized weld metal as well as provide the high temperature Creep Properties. Thus 347 electrodes/fillers are the only solution.

 

Hope it clears your doubt.

 

Thanks.

 

 

Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist & Consultant.
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299

pgoswami@quickclic.net

pradip.goswami@gmail.com

 


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Himan Nikdin
Sent: Tuesday, April 19, 2016 11:21 PM
To: materials-welding@googlegroups.com
Subject: [MW:24723] welding filler metal for SS321

 

Dear Experts

 

Refer to API582 table A-2 proposed filer to weld SS321 to SS321 is E347-XX/ER-347 but some manufacturers such as ESAB propose E/ER-308LSi to this base material (SS321 to SS321) operating temperature is +350 C,

would you please advise in this issue.

 

Regards,

H.Nikdin


--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/BLU180-W823AE7188B8126FC9E22999E6D0%40phx.gbl.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/hsb2r0xdf0r3yp6g1is6tv9l.1461557081654%40email.android.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/BLU180-W3CDF552E145723641A5B59E630%40phx.gbl.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eMCmH_v_pVKEczPJ5-2L0JJRfw4M9y%3DRGjV%2BUPvx8M6eQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[MW:24743] Request to suggest filler metal for joining AISI 430 with S355J2H

Dear Friends,
KIndly suggest filler metal for joining AISI 430 with S355J2H

Thanks & Best regards
Aly

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOenW4haN04SF3mNFzq2m4NNxUCXCi7vNUN3X4WjWRaQPy%3DTLw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Tuesday, April 26, 2016

RE: [MW:24742] RE: 24723] welding filler metal for SS321

This an Air Cooler, and the operating temperature is +350C.


Date: Mon, 25 Apr 2016 00:04:41 -0400
Subject: Re: [MW:24739] RE: 24723] welding filler metal for SS321
From: pgoswami@quickclic.net
To: materials-welding@googlegroups.com
CC: pgoswami@quickclic.net

What's the process fluid and the design temperature? 

-------- Original message --------
From: Himan Nikdin <himan.nikdin@outlook.com>
Date: 2016-04-24 11:26 PM (GMT-05:00)
To: materials-welding@googlegroups.com
Subject: [MW:24734] RE: 24723] welding filler metal for SS321


Dear Pradip

Since the operating temperature is below 400C, I think the E308LSi can be a good choice, Are you agree?

Regards,
Himan

From: pgoswami@quickclic.net
To: materials-welding@googlegroups.com
CC: himan.nikdin@outlook.com
Subject: RE: 24723] welding filler metal for SS321
Date: Wed, 20 Apr 2016 11:05:35 -0400

Hi Himan,

 

What's proposed by ESAB is not correct. Please seethe two attachments showing highlighted texts. S.S 321 is a Titanium stabilized steel. Hence the matching weld metals also  shall be  stabilized.

 

Titanium gets oxidized fast when it's added through coating.  Hence other stabilizers such as Nb has to be added to the weld puddle to provide the stabilized weld metal as well as provide the high temperature Creep Properties. Thus 347 electrodes/fillers are the only solution.

 

Hope it clears your doubt.

 

Thanks.

 

 

Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist & Consultant.
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299

pgoswami@quickclic.net

pradip.goswami@gmail.com

 


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Himan Nikdin
Sent: Tuesday, April 19, 2016 11:21 PM
To: materials-welding@googlegroups.com
Subject: [MW:24723] welding filler metal for SS321

 

Dear Experts

 

Refer to API582 table A-2 proposed filer to weld SS321 to SS321 is E347-XX/ER-347 but some manufacturers such as ESAB propose E/ER-308LSi to this base material (SS321 to SS321) operating temperature is +350 C,

would you please advise in this issue.

 

Regards,

H.Nikdin


--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/BLU180-W823AE7188B8126FC9E22999E6D0%40phx.gbl.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/hsb2r0xdf0r3yp6g1is6tv9l.1461557081654%40email.android.com.
For more options, visit https://groups.google.com/d/optout.

Monday, April 25, 2016

[MW:24741] API 1104 - WELDING PROGRESSION

Hello everyone,

I need to clarify the requirements of essential variables as described in API 1104.

We had conduction PQR's for API5L X70 material Butt Weld (5G position) in 36 inches x 22.23mm Wall Thickness as described below:

WPS 001

ROOT PASS: SMAW - E6010 - WELDING PROGRESSION - VERTICAL UPHILL
HOT    PASS: SMAW - E8010-P1 - WELDING PROGRESSION - VERTICAL UPHILL
FILL & CAP  : FCAW - E81T8-G - WELDING PROGRESSION - VERTICAL DOWNHILL


WPS 002

ROOT PASS: SMAW - E6010 - WELDING PROGRESSION - VERTICAL UPHILL
HOT    PASS: SMAW - E8010-P1 - WELDING PROGRESSION - VERTICAL DOWNHILL
FILL & CAP  : SMAW - E8010-P1 - WELDING PROGRESSION - VERTICAL DOWNHILL


With reference to the above parameters, we had conducted PQR's for both WPS on the same material and size. And the Mechanical test results had not proved any significant differences. I need to know why should I not write a WPS with the reference of the above 2 PQR's with HOT PASS welding progression as Vertical Uphill / Downhill.

With Regards,
R.Chandrasekhar
QC Engineer

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a9d67ddb-c321-4f55-9247-7ccd9219d722%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [MW:24740] Re: MIG welding process-reg

if it is conventional power source, restrict to below 13mm or go for FCAW

THANKS & BEST REGARDS,
KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,
CONSULTANT-WELDING & QUALITY

On Sun, Apr 24, 2016 at 8:50 PM, Vishwas Keskar Welding Manager Pune India <vvkeskar123@gmail.com> wrote:
No issue .
Qualify PQR and use .
Use latest power source /wire feeder from reputed  welding equp manufactures


On Thursday, April 14, 2016 at 4:27:05 PM UTC+5:30, Karthikeyan Shanmugananthan wrote:
Dear Experts
Can we use MIG welding process for load carrying structural steel.... and also provide limitations of MIG welding process

Expecting your valuable suggestions

Regard
S.karthikeyan
Chennai

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/469d6344-f288-48cc-be7d-38f6177218a6%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePqPO6OLMeYAAxnbryQQ0Fd0fWbvXMp1OAsQ_H15aSykg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [MW:24739] RE: 24723] welding filler metal for SS321

What's the process fluid and the design temperature? 

-------- Original message --------
From: Himan Nikdin <himan.nikdin@outlook.com>
Date: 2016-04-24 11:26 PM (GMT-05:00)
To: materials-welding@googlegroups.com
Subject: [MW:24734] RE: 24723] welding filler metal for SS321


Dear Pradip

Since the operating temperature is below 400C, I think the E308LSi can be a good choice, Are you agree?

Regards,
Himan

From: pgoswami@quickclic.net
To: materials-welding@googlegroups.com
CC: himan.nikdin@outlook.com
Subject: RE: 24723] welding filler metal for SS321
Date: Wed, 20 Apr 2016 11:05:35 -0400

Hi Himan,

 

What's proposed by ESAB is not correct. Please seethe two attachments showing highlighted texts. S.S 321 is a Titanium stabilized steel. Hence the matching weld metals also  shall be  stabilized.

 

Titanium gets oxidized fast when it's added through coating.  Hence other stabilizers such as Nb has to be added to the weld puddle to provide the stabilized weld metal as well as provide the high temperature Creep Properties. Thus 347 electrodes/fillers are the only solution.

 

Hope it clears your doubt.

 

Thanks.

 

 

Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist & Consultant.
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299

pgoswami@quickclic.net

pradip.goswami@gmail.com

 


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Himan Nikdin
Sent: Tuesday, April 19, 2016 11:21 PM
To: materials-welding@googlegroups.com
Subject: [MW:24723] welding filler metal for SS321

 

Dear Experts

 

Refer to API582 table A-2 proposed filer to weld SS321 to SS321 is E347-XX/ER-347 but some manufacturers such as ESAB propose E/ER-308LSi to this base material (SS321 to SS321) operating temperature is +350 C,

would you please advise in this issue.

 

Regards,

H.Nikdin


--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/BLU180-W823AE7188B8126FC9E22999E6D0%40phx.gbl.
For more options, visit https://groups.google.com/d/optout.

[MW:24734] RE: 24723] welding filler metal for SS321


Dear Pradip

Since the operating temperature is below 400C, I think the E308LSi can be a good choice, Are you agree?

Regards,
Himan

From: pgoswami@quickclic.net
To: materials-welding@googlegroups.com
CC: himan.nikdin@outlook.com
Subject: RE: 24723] welding filler metal for SS321
Date: Wed, 20 Apr 2016 11:05:35 -0400

Hi Himan,

 

What's proposed by ESAB is not correct. Please seethe two attachments showing highlighted texts. S.S 321 is a Titanium stabilized steel. Hence the matching weld metals also  shall be  stabilized.

 

Titanium gets oxidized fast when it's added through coating.  Hence other stabilizers such as Nb has to be added to the weld puddle to provide the stabilized weld metal as well as provide the high temperature Creep Properties. Thus 347 electrodes/fillers are the only solution.

 

Hope it clears your doubt.

 

Thanks.

 

 

Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist & Consultant.
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299

pgoswami@quickclic.net

pradip.goswami@gmail.com

 


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Himan Nikdin
Sent: Tuesday, April 19, 2016 11:21 PM
To: materials-welding@googlegroups.com
Subject: [MW:24723] welding filler metal for SS321

 

Dear Experts

 

Refer to API582 table A-2 proposed filer to weld SS321 to SS321 is E347-XX/ER-347 but some manufacturers such as ESAB propose E/ER-308LSi to this base material (SS321 to SS321) operating temperature is +350 C,

would you please advise in this issue.

 

Regards,

H.Nikdin


--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/BLU180-W823AE7188B8126FC9E22999E6D0%40phx.gbl.
For more options, visit https://groups.google.com/d/optout.

Sunday, April 24, 2016

[MW:24734] Re: MIG welding process-reg

No issue .
Qualify PQR and use .
Use latest power source /wire feeder from reputed  welding equp manufactures


On Thursday, April 14, 2016 at 4:27:05 PM UTC+5:30, Karthikeyan Shanmugananthan wrote:
Dear Experts
Can we use MIG welding process for load carrying structural steel.... and also provide limitations of MIG welding process

Expecting your valuable suggestions

Regard
S.karthikeyan
Chennai

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/469d6344-f288-48cc-be7d-38f6177218a6%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[MW:24734] Re: Run-Out Length for SMAW Process

This is related  with heat input.
What is your design calls?
Is impact testing is called in design drawing ?
If yes , qualify WPS with QW 409 supplementary essential variables
Here travel speed is related to run out length

On Sunday, April 10, 2016 at 2:25:34 PM UTC+5:30, Kurniatullah Sirajudin wrote:
Dear Expert,

A week ago, i received comment regarding welding for smaw process.

My client ask to me, run-out length for smaw process.

I don't know what is run-out length.


Please advise me 


Thank you & Regards

Kurniatullah Sirajudin

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/886017a1-3e92-40a1-81e9-3e917fd17de1%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[MW:24735] Re: Regarding welding of ErNicr3 and PWHT

PWHT is must in view of Hard HAZ on GR 91 side

On Tuesday, April 12, 2016 at 7:44:31 PM UTC+5:30, Anuj Sharma wrote:
Hi everyone please suggest

We have very less constrained space for the PWHT on and we have called 4 different PWHT teams and all teams have ignored PWHT due to less space.
Our material is SSH Header 40 mm thick and P91 material ehich we have to dummy with P91 material only.
As recommended by us to use ErNiCr3 filler wire with pre heat at 220deg C and no PWHT required is it ok.
??

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/391e7db6-4704-4954-b2b8-1215e1e788ec%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[MW:24734] Re: GTAW weld weaving

Normal weaving by manual GTAW is @12 mm, which shall be addressed in WPS

Vishwas Keskar

On Thursday, March 31, 2016 at 5:00:12 PM UTC+5:30, simon lawrence wrote:
Pls confirm that Weld weaving width ,  weld weave maximum how much we can accepted in GTAW process ?

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d15bd0c7-6c43-4d49-a465-8fc5a20d9d04%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Saturday, April 23, 2016

Re: [MW:24733] RE: 24729] Welding of SB729 UNS NO8020

no, u may use 317 which is readily available in the market

THANKS & BEST REGARDS,
KG.PANDITHAN, IWE,  AWS-CWI, CSWIP 3.1,
CONSULTANT-WELDING & QUALITY

On Sat, Apr 23, 2016 at 12:40 AM, rajesh s. mhaske ,Engineer Welding ,PUNE,INDIA <rajesh.mhaske17@gmail.com> wrote:
Dear sir,
     Thank you very much for your reply.ER320 LR is not available in our area so can i use ERNiCr-3 for welding of alloy 20 ?

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d7b04f3b-f29e-4218-b302-3b1850f90e38%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eO-fSbeuEmKushmvMUntNUho_VV%3DjJHR2Nz1o%2BKs9S17w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[MW:24731] RE: 24729] Welding of SB729 UNS NO8020

Dear sir,
Thank you very much for your reply.ER320 LR is not available in our area so can i use ERNiCr-3 for welding of alloy 20 ?

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d7b04f3b-f29e-4218-b302-3b1850f90e38%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Friday, April 22, 2016

Re: [MW:24731] RE: 24729] Welding of SB729 UNS NO8020

Pradip, what about 317 which has got more Mo than 320

On 22-Apr-2016 7:53 pm, "pgoswami" <pgoswami@quickclic.net> wrote:

Hi Rajesh,

If it involves welding or Alloy 20 to same , them ER320LR is the matching & ideal consumable. ERNiCrMo-3  will be over matching as well  as over priced. This filler could be used for dissimilar joints between alloy 20 and other alloys. Please seethe attachment for more details.

 
Thanks.

Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist & Consultant.
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299
pgoswami@quickclic.net
pradip.goswami@gmail.com



-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of rajesh s. mhaske ,Engineer Welding ,PUNE,INDIA
Sent: Friday, April 22, 2016 12:58 AM
To: Materials & Welding
Subject: [MW:24729] Welding of SB729 UNS NO8020

Dear All
      Please  provide the guidlines of welding of SB 729 and B462 (alloy 20 ),i have selected the ER320LR and ERNiCrMo-3 for welding of Alloy 20, is it correct ?

plz reply
      

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/9083c67a-d80a-41fb-bfc0-26c275834801%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/!%26!AAAAAAAAAAAYAAAAAAAAAOT5XfyRhstKvyeqQRSrfFXCgAAAEAAAAOLL9jWJnRlNiibrRouaze4BAAAAAA%3D%3D%40quickclic.net.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePjsCsxcP5gm0gr6Zy6_be0GU0B-NRJJgiSup2SYcB5ag%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[MW:24730] RE: 24729] Welding of SB729 UNS NO8020

Hi Rajesh,

If it involves welding or Alloy 20 to same , them ER320LR is the matching & ideal consumable. ERNiCrMo-3  will be over matching as well  as over priced. This filler could be used for dissimilar joints between alloy 20 and other alloys. Please seethe attachment for more details.

 
Thanks.

Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist & Consultant.
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299
pgoswami@quickclic.net
pradip.goswami@gmail.com



-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of rajesh s. mhaske ,Engineer Welding ,PUNE,INDIA
Sent: Friday, April 22, 2016 12:58 AM
To: Materials & Welding
Subject: [MW:24729] Welding of SB729 UNS NO8020

Dear All
      Please  provide the guidlines of welding of SB 729 and B462 (alloy 20 ),i have selected the ER320LR and ERNiCrMo-3 for welding of Alloy 20, is it correct ?

plz reply
      

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/9083c67a-d80a-41fb-bfc0-26c275834801%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[MW:24729] Welding of SB729 UNS NO8020

Dear All
Please provide the guidlines of welding of SB 729 and B462 (alloy 20 ),i have selected the ER320LR and ERNiCrMo-3 for welding of Alloy 20, is it correct ?

plz reply


--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/9083c67a-d80a-41fb-bfc0-26c275834801%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Thursday, April 21, 2016

[MW:24727] Ductile iron to carbon steel welding

This might helpful,


http://m.lincolnelectric.com/en-us/support/welding-how-to/Pages/welding-cast-iron-detail.aspx


http://www.esabna.com/euweb/oxy_handbook/589oxy15_4.htm

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f8a46eb4-0cda-4a7d-9891-b594d65e5708%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [MW:24727] Ductile iron to carbon steel welding

Nickel electrode with slow preheat up to 200degC. Max interpass temp same. Maintain preheat for 1 hour. Cover with insulating blanket and let cool down

Sent from my BlackBerry 10 smartphone.
From: JIJILAL K M
Sent: Πέμπτη, 21 Απριλίου 2016 - 13:52
To: materials-welding@googlegroups.com
Reply To: materials-welding@googlegroups.com
Subject: [MW:24726] Ductile iron to carbon steel welding

Dear Associates,


We are in requirement of  WPS & PQR  for welding a pipe support   ASTM A36 /Equivalent    to   Ductile Iron ASTM  A536 gr. 65-45-15 .

This is for  fire water system Shure joint welding . please refer attachments.

Much appreciated if you can support with relevant WPS & PQR for reference.


JIJILAL K.M. 
Thai Jurong Engineering Ltd,
KCE SPP Project,Thailand


--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHmEnHitavvOMaBveL0zQotmkyBK6TvwSL8xPwb4PRvVMfi%2BFA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[MW:24726] Ductile iron to carbon steel welding

Dear Associates,


We are in requirement of  WPS & PQR  for welding a pipe support   ASTM A36 /Equivalent    to   Ductile Iron ASTM  A536 gr. 65-45-15 .

This is for  fire water system Shure joint welding . please refer attachments.

Much appreciated if you can support with relevant WPS & PQR for reference.


JIJILAL K.M. 
Thai Jurong Engineering Ltd,
KCE SPP Project,Thailand


--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHmEnHitavvOMaBveL0zQotmkyBK6TvwSL8xPwb4PRvVMfi%2BFA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Wednesday, April 20, 2016

[MW:24725] RE: 24723] welding filler metal for SS321

Hi Himan,

 

What’s proposed by ESAB is not correct. Please seethe two attachments showing highlighted texts. S.S 321 is a Titanium stabilized steel. Hence the matching weld metals also  shall be  stabilized.

 

Titanium gets oxidized fast when it’s added through coating.  Hence other stabilizers such as Nb has to be added to the weld puddle to provide the stabilized weld metal as well as provide the high temperature Creep Properties. Thus 347 electrodes/fillers are the only solution.

 

Hope it clears your doubt.

 

Thanks.

 

 

Pradip Goswami, P.Eng,IWE
Independent Welding & Metallurgical Engineering Specialist & Consultant.
Ontario,Canada.
ca.linkedin.com/pub/pradip-goswami/5/985/299

pgoswami@quickclic.net

pradip.goswami@gmail.com

 


From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Himan Nikdin
Sent: Tuesday, April 19, 2016 11:21 PM
To: materials-welding@googlegroups.com
Subject: [MW:24723] welding filler metal for SS321

 

Dear Experts

 

Refer to API582 table A-2 proposed filer to weld SS321 to SS321 is E347-XX/ER-347 but some manufacturers such as ESAB propose E/ER-308LSi to this base material (SS321 to SS321) operating temperature is +350 C,

would you please advise in this issue.

 

Regards,

H.Nikdin

[MW:24724] welding filler metal for SS321

Both have no prob but higher temp ER347 is best.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/eb4280f7-0621-41a1-80d7-ef577c322cef%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...