Wednesday, April 27, 2011

Re: [MW:10871] ASME/ASTM equivalent of S355J2+N


S355j2+N is normalized supply condition material have impact cvn -40 deg..

ASTM A36 is as rolled material w/o any impact req


Arunachalam A <arunvani@gmail.com>
Sent by: materials-welding@googlegroups.com

04/27/2011 02:13 AM

Please respond to
materials-welding@googlegroups.com

To
materials-welding@googlegroups.com
cc
Subject
Re: [MW:10867] ASME/ASTM equivalent of S355J2+N





It is NOT ASTM A36. A36 has specified tensile of 420 N/mm2.


On Tue, Apr 26, 2011 at 4:44 PM, SENTHILKUMAR SWAMINATHAN <skumarswami@yahoo.co.in> wrote:
Vikas,
Refer attached may help you. Hope it is A36 (ASTM)
 

Regards,
S.SENTHILKUMAR




From: Vikas Bhandari <vikas.bhandari349@gmail.com>

To:
materials-welding@googlegroups.com
Sent: Tue, 26 April, 2011 9:09:50 AM

Subject:
[MW:10855] ASME/ASTM equivalent of S355J2+N


Dear All


What is the ASTM/ASME equivalent of structural material S355J2+N (minimum yield strength 355 MPa, Tensile 470 to 630 MPa, C: 0.20 max, Si: 0.55 max, Mn: 1.60 max , CE: 0.45 max). A link to reference document stating the same would be much appreciated.

Thanks & best regards
--
To post to this group, send email to
materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to
materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.




--

Arunachalam.A,
Abu Dhabi Gas Industries Ltd,
P.O.Box # 50124
Abu Dhabi, UAE
Mobile : +971-50-5257122

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...