Tuesday, April 26, 2011

Re: [MW:10857] Re : Blasting and Paint on Weldment

For any painting activities, ASME code is not applicable, only painting cods are applicable, also specially for painting you have to go to client specification which will guide you what paint system you have to apply.
 
Best regards
 
Tamer Said
Inspection Engineer
CSWIP 3.1  - BGAS Gr. 2 Holder

--- On Tue, 4/26/11, mustaffi <mustaffi@dynac.com.my> wrote:

From: mustaffi <mustaffi@dynac.com.my>
Subject: [MW:10851] Re : Blasting and Paint on Weldment
To: materials-welding@googlegroups.com
Date: Tuesday, April 26, 2011, 6:44 AM

 

Dear All,

 

Did anyone of you can help me for any references in ASME Code to proceed works for  Blasting and Paint at weldment area ..

I will go through with Thermal Spray Coating on that area..

 

Regards

Mus

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...