Friday, April 29, 2011

[MW:10880] Comparison of Large Dia Flanges (B16.47 series A & B) in Refinery services

Hi,

I have to use 30", 42", 48" pipes in Cude Oil, Naphtha, HSD and CRWS services.
What is the criteria between the series A & B for ASME B16.47. Regarding no. of bolts, enonomy, availability etc.
If anyone to know this please.

Regards

Krishnakumar
Fact Engineering & Design Organisation (FEDO)
Cochin, India

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:34913] Filler wire

E71T-1C  is Charpy Impact tested at -20degC E71T-1CJ is Charpy impact tested at -40degC. AWS Classification for FCAW is only a supplementary...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...