Re: [MW:17285] Welding of E316L material -Reg

316-15----- works on DC only. Deep penetration and bead appearence is not good
316-16------- works on DC/AC. It is best for surfacing and good bead appearence

Pandithan
Welding Consultant

On 4/3/13, rudolf saldanha <rudolf_jude@yahoo.com> wrote:
> Yes you can use 316-16 for 316L material
> You can also use 316-15 if it involves very low temperature charpy,
> 316-17 is better but it is not highly suitable for 3g welds as the weld
> metal is very fluid and welder skill is very important.
> 316-16 is good as it serves all purpose and all position.
>
> Hope the info helps
>
> ________________________________
> From: siva subramanian <ian_siv@yahoo.co.in>
> To: "materials-welding@googlegroups.com"
> <materials-welding@googlegroups.com>
> Sent: Monday, 1 April 2013, 23:01
> Subject: [MW:17261] Welding of E316L material -Reg
>
>
> Dear sirs,
>                  I have one clarification regarding welding of SA240 GR 316L
> material.
> May I use E316-16 to weld 316L material.If it is not possible means What is
> reason behind?
>
> Please Clarify me.
>
> Always Thankful,
> A.Sivasubramanian
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.