On Thu, Apr 21, 2011 at 3:45 PM, Hafiz Ali Alvi <alimalvi300@hotmail.com> wrote:
Dear All,
We have a problem of weld joint leak failure of insulated line on shoe support. So far we recommend installation of pipe clamps to stop leakage. Pipe sizes are 1" and 2" for total 8 locations.
Now my question is:
1) Is it permissible to just grind of the location of leakage on straight pipe and reweld? Because the other solution is to remove effected pipe and add new pipe piece and reweld support.
2) Is it permissible for socket weld joints (elbow or olet) to grind the existing weld and reweld the joint again?
Regards.
Hafiz Ali Alvi
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment