Dear Senthil, Height is not an essential, for welder qualification,as per to the SEC IX no height is prescribed, but position is essential. P.B.R. -------Original Message------- dear sir , i want prescribed height for fixing test coupon' for welder qualification as per ASME Sec-IX. thank u sen On Mon, Apr 18, 2011 at 8:37 AM, Raj <raj.inspection@gmail.com> wrote: Hi, No, there is no mandatory requirements regarding 'calibration certificates', 'prescribed height for fixing test coupon' for welder qualification as per AWS D1.1 or ASME Sec-IX. Cheers! Raj On Apr 18, 7:07 am, SENTHIL P <senbe...@gmail.com> wrote: > Dear sir, > i wish to know the general procedure for welder > qualification.e.g calibration certificate .is any precribed height for > fixing test piece for qualification. please clarify. > > thank u, > sen To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. |
Monday, April 18, 2011
Re: [MW:10720] Re: welder qualification
Subscribe to:
Post Comments (Atom)
[MW:34866] Presentation for WPS ,PQR AND WPQ as per ASME Sec IX in power point
Dear Experts. If anyone having presentation of WPS,PQR and WPQ as per ASME SEC.IX in power point then please share . Regards Sanja...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment