Friday, April 1, 2011

RE: [MW:10574] DPT for Structural welding

None by code, it shall be specified by the designer

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Feroz Mohammed
Sent: Friday, April 01, 2011 5:05 PM
To: materials-welding@googlegroups.com
Subject: [MW:10573] DPT for Structural welding

 

Dear All

 

Can any body tell me if it is required to do DPT for root run & after final welding in structural steel. If yes how much percentage

 

CODE: AWS D1.1

--

Thanks & Regards
Feroz Mohammed
Deputy Manager-QA&I

LANCO Infratech Ltd.

È : +91 9650490097
 

 


By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...