Saturday, April 23, 2011

[MW:10812] Re: 10776] welding bevel design

 

Standing in what code? From AWS D1.1 figure 3.4:

 

 

cid:image004.jpg@01CC01FA.C36D1720

cid:image006.jpg@01CC01FA.C36D1720cid:image009.jpg@01CC01FA.C36D1720

 

 

On Apr 22, 11:46 am, "Abuhanip bin Abdul" <abuha...@labuanship.com> wrote:

> I think your problem can be solve if try to search in Google about Joint

> Design.

>  I search just a couple minute in I found all the joint design for double

> bevel

>

>

>

>

>

>

>

> -----Original Message-----

> From: materials-welding@googlegroups.com

>

> [mailto:materials-welding@googlegroups.com] On Behalf Of hepo

> Sent: Thursday, 21 April, 2011 4:25 PM

> To: Materials & Welding

> Subject: [MW:10776] welding bevel design

>

> hello all

> can anyone guide me to a online site for ready Joint design details/

> sketches available to be used for general purpose fabrication plate works...

> job in hand 50mm thk plt to weld to higher thk using double bevel ...looking

> for bevel and root thk...

> thanks in advance

> hepo

>

> --

> To post to this group, send email to materials-welding@googlegroups.com

> To unsubscribe from this group, send email to

> materials-welding+unsubscribe@googlegroups.com

> For more options, visit this group's bolg athttp://materials-welding.blogspot.com/

> The views expressed/exchnaged in this group are members personel views and

> meant for educational purposes only, Users must take their own decisions

> w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...